John Deere 1026R Problems (Solutions Included)

The John Deere 1026R is a sub-compact utility tractor that was first introduced in 2014. Since then, it has become one of the most popular models in the John Deere lineup. Despite its popularity, the 1026R has been known to have some issues that owners have complained about.

Some of the John Deere 1026R Problems include engine overheating, hydraulic leaks, and transmission problems.

John Deere 1026R Problems

 Here are some common issues that have been reported:

1. Engine stalling:

This problem has been linked to the fuel pump, which may not be providing enough pressure to the injectors. A new fuel pump may be needed to fix this issue.

2. Hydraulic issues:

Some owners have reported problems with the hydraulic system, such as leaks and slow response times. These issues can usually be fixed by bleeding the hydraulic lines and replacing any damaged parts.

3. Electrical problems:

There have been reports of electrical issues, such as faulty gauges and lights flickering on and off. These problems can often be traced back to loose or corroded wires and connections. Tightening up all electrical connections should fix the problem.

4. Transmission problems:

Some 1026R owners have had trouble with their transmission, especially when trying to shift into higher gears. This is typically caused by worn-out clutch discs or bearings in the transmission.

John Deere 1026R Problems and their fix

John Deere 1026R most common Problems are-

  1. Engine overheating problem.
  2. Hydraulic lac problem.
  3. Transmission problem.
  4. Brake problems.
  5. PES system problems.
  6. Power steering problem 
  7. Steering rack problem.


However, this problem arises, but you can easily solve this issue below if you’d like.

1. Engine overheating problem fix

If there is a problem with your engine, you need to check the thermostat. If the thermostat has become stuck shut or closed, then the engine would overheat. When it overheats, then a red light will switch on as well.

In this situation, you need to have your service manual for John Deere 1026R and follow it exactly in order to fix this problem.

2. Hydraulic Lack problem fix

If you find that your hydraulic system doesn’t work properly, the problem can be very serious. If a problem with the hydraulic system is found, you need to have it fixed by any means possible. You need to get in touch with John Deere service center numbers and addresses where they will help you.

3. Transmission problems fix

Make sure that your Transmission needs lubrication as well as adjustment. You need to make sure that all your transmission parts are fine and in order.

4. Brake problems fix

Make sure that your brakes are working well and properly. If there’s a problem with the brake system, you need to get it fixed.

5. PES system problems fix

If your PES system is not working, then it can cause serious damage to the tractor. Over time, this can lead to a serious problem so fix it as soon as you can.

6. Power steering problems fix

If you have problems with your power steering system, then it can be very dangerous and problematic. If you are facing any problem with the power steering system, it is suggested that you get it fixed by a professional.

7. Steering rack problem fix

If there is a problem with your steering rack, then that would render your tractor useless as well as dangerous to be used. It is recommended to fix this as soon as possible.

What is the Difference between John Deere 1025R And 1026R?

The John Deere 1025R and 1026R are two very different models of compact utility tractors. The 1025R is a sub-compact tractor while the 1026R is a compact tractor. Both models are designed for small property owners, hobby farmers, and landscapers.

The biggest difference between the two models is size. The 1025R has a 25 horsepower engine while the 1026R has a 26 horsepower engine. The 1025R also has a smaller turning radius than the 1026R.

Another difference is that the 1025R comes standard with a manual transmission while the 1026R comes with hydrostatic transmission.

Both models come with 4-wheel drive and have similar features such as cruise control, power steering, and an enclosed cab with heat and air conditioning (optional on the 1025R). They both have mid-mount mowers which means they can mow in tight spaces that larger mowers cannot reach.

So, which model should you choose? It really depends on your needs. If you have a large property or frequently mow in rough terrain, then you will need the extra power and stability of the 1026R.

If you have a smaller property or primarily mow-level lawns, then the 1025R will be more than adequate.

What is the Difference between John Deere 1025R And 1026R

Read More About John Deere X720 Problems

How Much Can a 1026R Lift?

A 1026R can lift approximately 1,000 pounds.

How Much Does a John Deere 1026R Tractor Weigh?

John Deere 1026R tractors weigh approximately 2,800 pounds. However, the weight can vary depending on the model and year of the tractor. The John Deere 1026R is a compact utility tractor that was first introduced in 2004.

It is powered by a three-cylinder diesel engine and has a hydrostatic transmission. The 1026R is available in both two-wheel drive and four-wheel drive models.

What Engine Does the 1025R Have?

The John Deere 1025R comes equipped with a Yanmar 3TNV88C-BGE 18.5 HP engine. This Tier 4 Final-compliant engine provides the power and torque needed for a variety of tasks, while still being fuel efficient.

The three-cylinder design of the engine provides plenty of torque, making it ideal for operating attachments such as a snowblower or mower deck.

The engine is also designed to run quietly, so you can enjoy your time outside without disturbing the peace.

What Engine Does the 1025R Have

John Deere 1026R Price

The John Deere 1026R is a great value for the money. It’s a well-built machine that is perfect for those who need a little more power than a lawn tractor can provide but don’t want to spend the money on a full-size tractor.

The 1026R comes with plenty of features that make it a great choice for anyone looking for an affordable way to get into owning their own tractor.

One of the most notable features of the 1026R is its 24.2 horsepower diesel engine. This provides plenty of power for those who need to do some serious work around their property. The hydrostatic transmission is also a great feature that allows for easy and precise control when operating the tractor.

Another great thing about this tractor is that it comes standard with four-wheel drive, which is perfect for those who need to tackle tough terrain or even just have peace of mind knowing they can handle whatever Mother Nature throws their way.

As far as pricing goes, the John Deere 1026R falls right in line with other tractors in its class. It’s not the cheapest option out there, but it’s also not going to break the bank either.

When you factor in all of the features and benefits that come with this machine, it’s easy to see why it’s such a popular choice among those in the market for an affordable tractor.

John Deere 1026R Specs

The John Deere 1026R is a sub-compact utility tractor that was introduced in 2010. It features a Yanmar 3-cylinder diesel engine with 26 hp at 2600 rpm. The 1026R is available in both 2WD and 4WD models.

It has a hydrostatic transmission with infinite forward and reverse speeds. The standard tires are turf tires, but bar tread or ag tread tires are also available. The wheelbase is 60 inches and the overall length is 108 inches.

The width is 54 inches (with turf tires) or 62 inches (with bar/ag tread tires). The height is 77 inches (2WD) or 81 inches (4WD). The 1026R has a category 1 three-point hitch with a lift capacity of 1200 lbs at the ball ends.

The PTO is independent, 540 rpm only on the rear end for 2WD models, and 1000 rpm on all four wheels for 4WD models.

John Deere 1026R Specs

Read Also John Deere Stx38 Problems

John Deere 1026R Attachments

If you’re looking for a versatile machine that can handle just about any task on your property, look no further than the John Deere 1026R.

This hardworking machine comes with a variety of attachments that allow you to tackle just about any job, big or small. From mowing the lawn to clearing snow, the John Deere 1026R is up for anything.

The John Deere 1026R comes standard with a 54″ mid-mount mower deck. This deck is ideal for mowing large areas of grass quickly and easily. For tougher jobs, like removing thick brush or branches, the 1026R can be equipped with a 60″ power brush attachment.

This attachment makes short work of even the most stubborn debris. When it comes to snow removal, the John Deere 1026R has you covered there too.

With the optional snowblower attachment, you can clear your driveway and sidewalks in no time flat. And when spring rolls around again, simply detach the snowblower and attach the included front-end loader bucket to start working on landscaping projects right away.

No matter what kind of work you need to do on your property, the John Deere 1026R is up for the task.

With its variety of attachments and ability to handle just about any job thrown its way, this machine is sure to become your go-to for all things outdoors.

John Deere 60D Mower Deck Parts Diagram

If you’re a John Deere 60D owner, then you know that keeping your mower deck in good shape is important. After all, the mower deck is what helps to make sure your lawn looks its best. Thankfully, finding John Deere 60D mower deck parts isn’t difficult – especially if you have a diagram.

There are a few different places where you can find a John Deere 60D mower deck parts diagram. The first place to check is in the operator’s manual that came with your machine. This is probably the most accurate source of information and it will give you an idea of what parts you need to order.

Another option is to go online and search for the “John Deere 60D mower deck parts diagram.” This should bring up a number of results from which you can choose. Be sure to select a reputable site so that you can be confident in the accuracy of the information provided.

Once you have your John Deere 60D mower deck parts diagram, take some time to familiarize yourself with it. This way, when it comes time to replace or repair any components, you’ll know exactly what needs to be done.

Keeping your mower deck in good shape will ensure that your lawn looks its best – so don’t delay in getting the information and tools you need.

John Deere Tractors near Me

If you’re looking for John Deere tractors near you, there are a few places you can look. The first is your local John Deere dealer. They should have a good selection of new and used John Deere tractors on hand, as well as knowledgeable staff who can help you find the perfect tractor for your needs.

Another option is searching online classifieds websites like Craigslist or eBay. Here you’ll find a wide variety of both new and used John Deere tractors being sold by individuals and dealerships.

Just be sure to do your research before making any purchase, as it’s important to know what you’re getting into beforehand.

Finally, if you know someone who already owns a John Deere tractor, they may be willing to sell or trade it to you. This could be a great option if you’re able to find someone nearby who’s looking to upgrade to a newer model.

No matter where you end up finding your John Deere tractor, be sure to take some time test-driving it before making your final decision.

This will give you a feel for how the tractor handles and whether it’s the right fit for your needs.

John Deere Clothing

John Deere clothing is some of the most popular and stylish farm-themed clothing on the market. The company has been making quality outdoor gear for over 180 years, so they know a thing or two about comfort and durability.

Their clothes are perfect for any activity, whether you’re working on the farm or just enjoying a day in the great outdoors.

Their shirts, jackets, pants, and hats are all made from high-quality materials that will keep you comfortable no matter what the weather is like. And their style is timeless – you’ll look great in John Deere clothes no matter what year it is.

If you’re looking for stylish and practical farm-themed clothing, John Deere is the way to go.


ModelSeries 1023E
Fuel Capacity21L

How is the transmission on a 1026r cooled?

I have a 1989 JD 1026R and It has overheated twice within an hour I have no idea how the transmission is cooled. No visible fan or water pump, just fins on the tranny. Not sure about Deere 1026, but for Kubota transmissions, you need to make sure that there are no hydraulic leaks in the hydraulic lines from the manifold to the transmission.

The oil cooler on Kubota engines is part of a larger radiator that also cools both engine oil and transmission.

How is the transmission on a 1026r cooled

What is the difference between John Deere 1025R and 1026R?

1025R vs 1026R, if there are no major changes in the configuration of the engine, transmission, body, and tires, then there must be a difference between them.

For example, the front and rear wheels must be different sizes. In fact, the 1025R is a type 2 John Deere tractor. Because from its creation to 1996, the 1025R is only produced in two tractors with different configurations.

Is it a John Deere 1026R four-wheel drive?

Yes, the John Deere 1026R tractor can be. You can manually lock the front wheels into a four-wheel drive if you need it and then use the power steering to turn the rear wheels.

What is the most sought-after John Deere tractor?

The most popular John Deere tractor is the 1025R. It is the first type 2 John Deere tractor that was manufactured from 1987 to 1996. It is a very popular model because of its small size, low power, and maneuverability.

It is a very popular type 2 John Deere tractor because it is considered to be the most reliable and durable of all.

How much can a John Deere 1026R lift capacity?

The 1026R has a maximum lift capacity of 2,250 pounds with the front and rear lift beams. The maximum weight is 2,000 pounds. The maximum ground clearance is 8.5 inches. The maximum width of the tractor is 45 inches. The maximum width of the trailer is 43 ½ inches and the maximum weight is 1,100 pounds.

What tractor is comparable to the John Deere 1026R?

A comparable tractor is the Ford 3000 series. The Ford 3000 series is a class 2 truck and it is somewhat comparable to the 1026R. The Ford 3000 series has a great reputation for reliability.


What is a 1026R?

1026R, the main difference between the 1025R and 1026R is that it has the same engine power of 150 HP. It also has an automatic transmission and a strengthened body structure.

Where is John Deere 1026R made?

John Deere 1026R is made in the USA. The tractor is still being produced by John Deere.

How much horsepower is a John Deere 1026R?

Old John Deere 1026R can produce up to 25 horsepower. The first generation of the machine had a single-cylinder engine, which produced 18 horsepower.

Is 1025R a cat 1 tractor?

Yes, 1025R is all the same as it is a cat 1 tractor. It has all the features a cat 1 tractor must have.

John Deere 1025R Things They Aren’t Telling You: Tip-overs, overheat, lift capacity & others


John Deere 1026R problems can include engine trouble, transmission issues, and electrical problems. Some of the most common John Deere 1026R problems reported by owners include difficulty starting the engine, overheating, and unexpected shutdowns.

While many of these problems can be fixed with simple repairs or maintenance, some may require more extensive work.

Leave a Comment