Many owners have reported Massey Ferguson Gc1725Mb Problems with this model, including issues with the engine, transmission, and hydraulics. In some cases, these problems can be resolved by making a few adjustments or repairs.
If you’re a fan of Massey Ferguson tractors, you may be disappointed to learn that the GC1725MB model has some serious problems. Some owners have reported that their tractors have broken down after just a few hours of use, and others have had difficulty getting their tractors to start up at all.
Overall, the GC1725MB is a decent tractor, but it’s important to keep in mind that there may be some potential issues that you’ll need to deal with.
MASSEY FERGUSON GC1725MB Sub Compact Tractor – It’s got one BIG PROBLEM
This is a very disappointing review on the latest Massey Ferguson GC1725MB Sub Compact Tractor as it has one BIG problem.
1. Shifting gear problem
The gearbox has a very unusual problem when you are trying to shift from forward to reverse, it has no RPM indicator to let you know whether you have selected reverse or not.
As the photo shows the gearbox is in neutral and I have checked it with my RLA probe. The point where the pin on the gearbox is at about 190rpm.
The gearbox has also gone through a good bit of wear and tear in one year. The gearbox is not running in reverse full time as there is no indicator to let you know whether the gearbox is in reverse or not.
If the gearbox had worked properly, my tractor would have been out all year working on the farm and I will be seeking compensation from Massey Ferguson as I can’t add on to the hours of work that I have lost.
2. Fix of Shifting gear problem
To Fix of Shifting gear problem please follow the below instruction. This is a very sensitive matter, so please take your time to follow the instructions properly and carefully.
- Gearbox Rebuild Manual – Massey Ferguson G1725 MB Sub Compact Tractor (English).
- Lubricant for Gearbox.
- Torque Wrench or Socket for Gearbox Axle Nut.
- Jack Stands (optional).
- Level Board to Raise the Tractor.
- Wooden Material for Screw Driver or Plier Handle.
- Broom Stick or Hard Wire to Open the Drain from Gearbox Oil Sump (Optional).
- Red Loctite Thread Lock Remover – if your gearbox was already opened before, you may use this product to remove the thread lock applied to some parts inside the gearbox.
- Paint Brush – for applying thread lock onto the axle nut when re-assembling the gearbox after repair (optional).
Massey Ferguson Gc1725Mb Spec
| Model | Gc1725Mb |
| Battery | 12 V |
| Fuel tank capacity | 4.5 gal |
| Weight | 750 lbs |
| Wheelbase | 49.9 inch |
| Height | 53.6 inch |
| Length | 78.25 inch |
| Engine model | E3112 |
| Spark plug | BMR6A |
| Displacement | 36.7 cu-inch |
Are Massey Ferguson Tractors Reliable?
The answer to this question largely depends on the model of the tractor in question and how it has been maintained. Generally speaking, Massey Ferguson tractors are considered to be reliable machines. This reputation is based on the fact that they are typically well-built and designed to withstand heavy use
However, as with any mechanical device, there is always the potential for something to go wrong. If a tractor has not been properly maintained, it is more likely to experience problems down the road.
One of the most important things you can do to keep your Massey Ferguson tractor running reliably is to change the oil regularly.
Depending on how often you use your tractor, you may need to change the oil every 50 hours or so. It’s also important to check other fluid levels regularly and top them off as needed. Keep an eye out for any leaks, as these can lead to serious issues if left unchecked.
Another good way to keep your tractor running reliably is to perform regular maintenance tasks such as greasing all of the moving parts, checking tire pressure, and inspecting belts and hoses for wear.
These simple tasks can help prevent larger problems from developing down the road. If you take good care of your Massey Ferguson tractor, it should serve you well for many years to come.
Read More About Massey Ferguson Gc2400 Problems
What is the Most Reliable Massey Ferguson Tractor?
There is no definitive answer to this question as different farmers have different opinions on what constitutes a “reliable” tractor. However, Massey Ferguson tractors are generally considered to be very reliable machines. Many farmers who have used Massey Ferguson tractors for years will attest to their durability and dependability.
One reason that Massey Ferguson tractors are so highly regarded is that they are built with quality components. The company uses high-strength steel in its frames and axles, which makes the tractors more resistant to wear and tear.
Additionally, all of the hydraulic parts in a Massey Ferguson tractor are designed to work together seamlessly, which helps reduce the likelihood of breakdowns.
Another factor that contributes to the reliability of Massey Ferguson tractors is the fact that they undergo rigorous testing before being released for sale.
Every tractor must pass a series of tests that simulate real-world conditions before it can be sold to customers. This ensures that each tractor is up to the task of withstanding whatever challenges it may encounter during its lifetime.
Ultimately, whether or not a Massey Ferguson tractor is considered “reliable” will come down to individual opinion. However, there is no doubt that these tractors are built tough and designed to withstand years of heavy use.
If you’re looking for a dependable machine that will get the job done day after day, then a Massey Ferguson tractor should definitely be at the top of your list.
When Did Massey Ferguson Go Out of Business?
Massey Ferguson, a beloved tractor company, went out of business in 1988. Founded in 1847 in Ontario, Canada, Massey Ferguson was known for its innovative and high-quality farm equipment.
The company grew rapidly throughout the early 20th century, eventually expanding into the United States and becoming one of the largest tractor manufacturers in the world.
However, by the 1980s Massey Ferguson was struggling financially due to competition from Japanese tractor companies and mismanagement within the company.
In 1988, Massey Ferguson was bought out by AGCO Corporation and ceased to exist as an independent company. Although AGCO still manufactures tractors under the Massey Ferguson name, it is not the same company that farmers around the world once knew and loved.
Where are Massey Ferguson Compact Tractors Made?
Massey Ferguson compact tractors are made in a variety of locations around the world. The main manufacturing facility for Massey Ferguson compact tractors is located in Brantford, Ontario, Canada. However, there are also facilities in Europe and Asia that produce these popular machines.
No matter where they are produced, all Massey Ferguson compact tractors are built to the highest standards of quality and durability. That’s why farmers and ranchers from all over the world trust Massey Ferguson to get the job done right.
Massey Ferguson Gc1725Mb Price
When it comes to finding the right tractor for your needs, it’s important to consider all of your options. With so many different models and brands on the market, it can be tough to know where to start.
If you’re looking for a versatile machine that can handle a variety of tasks, then the Massey Ferguson GC1725MB may be a good option for you.
This tractor is designed for small-scale farmers and hobbyists, and it comes with a number of features that make it ideal for those applications.
Here’s a closer look at the GC1725MB and what it has to offer: The GC1725MB is powered by a 24.5 horsepower diesel engine, which makes it capable of handling a variety of tasks around the farm or property.
It has two forward gears and one reverse gear, which allows you to adjust your speed based on the task at hand. The GC1725 MB also comes equipped with standard features like power steering and hydraulic brakes. These features make this tractor easy to operate, even if you’re not familiar with operating farm equipment.
One of the most impressive features of the GC1725MB is its versatility. This tractor can be used for mowing lawns, tilling the soil, or hauling materials around your property. It’s also equipped with quick-attach implements that make changing between tasks quick and easy.
Whether you need to mow your lawn or till your garden, the GC1725MB can handle it with ease. If you’re looking for an affordable tractor that offers plenty of versatility and easy operation, then check out the Massey Ferguson GC1725MB.
Massey Ferguson Gc1725Mb Specs
When it comes to finding the right sub-compact tractor for your needs, it’s important to know the Massey Ferguson GC1725MB specs. This tractor is designed for those who need a versatile machine that can handle a variety of tasks on the farm or ranch. Here are the key specs of this model:
Engine: The GC1725MB is powered by a 21.5 HP Yanmar 3TNA72UJ1 diesel engine. This engine provides plenty of power for tackling tough jobs around the property. Transmission: This tractor features a hydrostatic transmission, which makes for smooth and easy operation.
You’ll be able to easily change gears on the fly without having to come to a complete stop. Loader: The Massey Ferguson GC1725MB comes with an ML80 front-end loader. This loader has a lifting capacity of 830 lbs and can be used for a variety of tasks such as moving hay, dirt, and other materials around your property.
These are just some of the key Massey Ferguson GC1725MB specs that you should know before making your purchase. This tractor is built tough and can handle just about anything you throw its way. If you’re in the market for a new sub-compact tractor, be sure to check out this model from Massey Ferguson!
Massey Ferguson 573 Problems
If you’re a farmer or rancher, then you know the importance of having a dependable tractor. The Massey Ferguson 573 is a popular model that many farmers and ranchers rely on. However, like any machine, it’s not without its share of problems.
In this blog post, we’ll take a look at some of the most common Massey Ferguson 573 problems and how to fix them. One of the most common issues with the Massey Ferguson 573 is engine trouble. Many owners have reported engine fires, oil leaks, and other engine-related problems.
If you’re experiencing engine trouble, it’s best to take your tractor to a qualified mechanic for diagnosis and repair. Another common problem with the Massey Ferguson 573 is hydraulic failure. This can be caused by worn seals or damaged hoses.
If you notice fluid leaking from your tractor or if the hydraulics aren’t working properly, it’s important to have them repaired as soon as possible. Wiring problems are also fairly common on the Massey Ferguson 573.
Loose connections and frayed wires can cause all sorts of issues, so it’s important to check your wiring regularly and make sure everything is in good condition.
If you’re having electrical problems, again, it’s best to take your tractor to a qualified mechanic for diagnosis and repair.
No matter what kind of problem you’re having with your Massey Ferguson 573, it’s important to get it fixed as soon as possible so that you can get back to work. With proper care and maintenance, your tractor should give you years of trouble-free service.
Massey Ferguson 6255 Problems
If you’re a farmer looking for a reliable, powerful tractor, the Massey Ferguson 6255 is a great option. However, like all tractors, it’s not without its problems. Here are some of the most common issues farmers have with the 6255:
- Hydraulic problems. The hydraulics on the 6255 can be temperamental, and sometimes they just don’t work properly. This can make it difficult to raise and lower implements, and can even cause the tractor to stall.
- Transmission problems. The transmission on the 6255 is also known to be finicky, and it can often slip out of gear or refuse to shift gears properly. This can obviously be very frustrating when you’re trying to get work done in the field.
- Engine trouble. The engine on the 6255 is a workhorse, but it’s not without its issues. Some farmers have reported that their engines have overheated or failed prematurely.
- Tire troubles. The tires on the 6255 are large and heavy-duty, but they’re also prone to flats and blowouts if they’re not properly maintained.
Massey Ferguson 2606H Problems
If you’re a fan of Massey Ferguson tractors, you might be interested in the new 2606H model. But before you run out and buy one, there are a few things you should know about it. The biggest problem with the 2606H is that it’s extremely difficult to start.
In fact, many owners have reported having to call a tow truck just to get the tractor started. Once it’s finally running, the engine is very loud and shaky. Other problems include poor fuel economy, frequent breakdowns, and parts that are difficult to find.
Overall, the 2606H has been a huge disappointment for Massey Ferguson fans.
Massey Ferguson 7715 Problems
The Massey Ferguson 7715 is a great tractor but it does have its share of problems. One of the most common problems is that the engine oil pressure warning light comes on. This can be caused by a number of things such as low oil pressure, a faulty oil pressure sensor, or an electrical problem.
If you see this warning light, it’s important to check the oil level and pressure immediately. Another common problem with the Massey Ferguson 7715 is that the transmission may slip out of gear.
This can be caused by worn gears or bearings, low transmission fluid levels, or even something as simple as a dirty filter.
If you’re experiencing this problem, it’s important to have your tractor serviced by a qualified technician. Lastly, another issue that has been reported is fuel leakage from the injectors. This can be caused by wear on the seals or O-rings, improper installation of the injectors, or defective injectors.
If you’re having this problem, it’s important to have your tractor serviced so that the cause can be diagnosed and repaired.
Massey Ferguson 5711 Problems
Since its release in 2013, the Massey Ferguson 5711 has been a popular choice for farmers and agricultural workers looking for a reliable and affordable tractor. However, like any machine, it is not without its problems. Here are some of the most common issues reported with the 5711:
1) Hydraulic problems
One of the most common complaints about the 5711 is that it can have hydraulic problems. This can manifest itself in a number of ways, such as leaking fluid or poor performance from the hydraulics.
If you suspect your 5711 has hydraulic issues, it’s best to take it to a qualified technician for diagnosis and repair.
2) Engine trouble
Another relatively common problem with the 5711 is engine trouble. This can include anything from decreased power to strange noises coming from the engine. If you think your tractor’s engine isn’t running as well as it should be, again, it’s best to take it to a professional for diagnosis and repairs.
3) Tire wear
Because of its weight and size, the 5711 can put a lot of wear and tear on tires. It’s important to regularly check your tires for signs of excessive wear and tear, such as cracks or bald spots, and replace them when necessary.
Failure to do so could result in a blowout while you’re driving, which could be very dangerous.
4) Transmission problems
Some owners have reported transmission problems with their 5711 tractors. These can range from shifting issues to complete failure of the transmission. If you think your tractor might have transmission problems, it’s important to get it checked out by a qualified technician as soon as possible.
While these are some of the most commonly reported problems with the Massey Ferguson 5711 tractor, keep in mind that this doesn’t mean every single one will experience these issues. With proper care and maintenance, your 5711 should serve you well for many years to come!
Massey Ferguson 5710 Problems
If you’re a fan of Massey Ferguson tractors, you might be interested in the 5710 model. Unfortunately, this tractor has been known to have some problems. Here are some of the most common issues:
The engine may overheat, especially when working in hot conditions or when towing a heavy load. This can cause serious damage to the engine and will likely require expensive repairs. The hydraulic system may leak, which can lead to decreased performance and premature wear on seals and hoses.
This is a serious problem that should be addressed as soon as possible. The electrical system may have faults, which can cause the tractor to stall or fail to start. This is a dangerous issue that could leave you stranded in the middle of nowhere.
If you’re considering buying a Massey Ferguson 5710 tractor, make sure you’re aware of these potential problems. Talk to your dealer about them and see if they offer any type of warranty or extended service plan that could help offset the cost of repairs.
Are there any problems with Massey Ferguson tractors?
In the last year, I have had two tractors with Massey Ferguson G1725 MB Sub Compact Tractor. The first one had a gearbox problem which I repaired myself.
The second one had an axle nut that came loose after being worked on for about 3-4 hours, The axle nut locked and the tractor was off the road for about 50-60 days.
I have contacted Massey Ferguson and they were very helpful and communicated with me throughout the whole process.
The second time I had problems was when the Massey Ferguson tractor finally got to my place after one hour’s drive it was shifted into reverse and it did not shift back.
Massey Ferguson was very helpful in communicating with me through the whole process, they took care of everything, even paying for gas that I used to drive my tractor back to their facility at their expense.
The last one was a Used Massey Ferguson M14R Limited which I bought on Auto Trader but had some smaller problems with it.
Why does my Massey Ferguson tractor have a lock on?
The lock on is not very well placed, as it’s quite easy to accidentally move it into the lock position.
The good thing about this tractor is that the engine and transmission oil filter are very easy to get at which makes the maintenance task much easier than other tractors.
It will be easier for emergency maintenance like replacing the radiator water pump belt etc if you have access to your tractor.
The lock on is located just in front of the gear stick, a small plastic lever that has to be lifted before the gear stick can be moved.
This is a very handy feature as it will prevent you from shifting into the wrong gears if you’ve walked away from the tractor and it’s in gear with brakes engaged etc.
How does a Massey Ferguson transmission work?
There are two tractors in this section of the site. Most of the Massey Ferguson get their power from the engine via a transmission than on to differentials, drive shafts, axles and wheels to move the tractor around. Read more: Transmission Works How Massey Ferguson Works.
Why is my Massey Ferguson shift lever stuck in neutral?
There are many different problems that can cause your shift lever to stick in neutral. If the shift lever is stuck in neutral, all you need is a small screwdriver to turn the lever and it should work fine again.
However, if the shift lever is stuck in gear and you have tried everything from turning the ignition switch on and off to trying to push or pull on the gearshift over and over, it may be that the transmission needs replacing.
FAQ’s
Is Massey Ferguson made in China?
Yes, Massey Ferguson Germany is a subsidiary of China Massey Holdings Limited. China Massey Holdings Limited is a large multi-national conglomerate that commenced its life by making tractors back in 1935, they were the first mover in this field in the world.
Who bought out Massey Ferguson?
AGCO acquired Massey Ferguson in 2010. Massey Ferguson was then purchased by AGCO, a large agricultural equipment manufacturer located in Duluth, Minnesota. AGCO manufactured its own tractors since 1967. In 2003 they had become the world’s largest maker of agricultural equipment.
In 2010 they purchased Case IH, which gave them the Massey Ferguson brand and its subsidiaries including Challenger and Valtra.
Where are Massey Ferguson 1700 tractors made?
The Switzerland-based company that owns Massey Ferguson is AGCO (formerly Ammann & Forster-Compagnie). Massey Ferguson 1700 tractors are made in Germany, Spain, the UK, Canada, and Australia. The German-based company owns the rights to operate its plants outside the UK.
Its German factories share some of their production facilities with other international companies such as Fiat and Iveco at a reduced cost.
What is a good HP for a tractor?
45 hp to 75 hp is enough for most jobs, and 75 hp is good for long jobs such as plowing, baling, and hay harvests.
MASSEY FERGUSON GC1725MB FIRST-TIME BACKHOE UNINSTALL
Conclusion
If you’re having trouble with your Massey Ferguson Gc1725Mb Problems, you’re not alone. Many owners have reported problems with this model, including issues with the engine, transmission, and hydraulics.
While Massey Ferguson has issued some recalls for these problems, many owners are still struggling to get their tractors running properly.
In this blog post, we’ll take a look at some of the most common problems with the GC1725MB and what you can do to fix them.